The GY-LS type plastic tape drawing machine can process material of polypropylene or high density polyethylene, through heating, extruding and drawing, and into tapes that is then winded for weaving of the Circular loom.
1. The plastic tape drawing machine can use 100% regenerated PP&PE, powder or grain PP or HDPE to produce the tapes.
2. We use 38CrMoAl alloy steel to make screw and cylinder of extruder for this machine, the hardness of the steel is over HV950 after nitrogenation treatment.
3. There is also helical gear reducer made of 20CrMnTi alloy steel that applied to the extruder.
4. The extruder adopts endurable aluminum cast heater.
|Diameter of screw(mm)||110||110||120||120|
|Ration of screwL/D||23:1||23:1||23:1||23:1|
|Rotational Speed of screw(r/min)||20-75||20-75||15-70||15-70|
|Width of Die(mm)||700||800||1000||1200|
|Number of oven||2||2||2||2|
|Motor power of extruder(kw)||18.5/22||22/30||22/30||22/30|
|Heating power of extruder(kw)||34||36||43||47|
|Power of Driving motor(kw)||5.5||5.5||7.5||7.5|
|Heating power of the oven(kw)||15||15||20||24|
|Thickness of tape(mm)||0.025-0.08||0.025-0.08||0.025-0.08||0.025-0.08|
|Installing dimension (L×W×H)(mm)||13300×1350
GY-BSL series Plastic flat film extrusion machine with the other name of flat yarn Extrusion line is designed and researched on the base of introducing and assimilating the up-to-dated technologies at home and abroad.
This machine is advanced with the adoption of international advanced electric digital-simulation control technology, such as computer-controlled frequency, conversion speed regulation, and controllable silicon direct current speed regulation. This also in turns makes the main target reach the international advanced level.
In the meanwhile, with high production Efficiency and high quality of tape tube forming as required, this assembly can also be equipped with advanced band net change structure as well as fibrosis structure that are used for producing flexible packaging bags or fibrosis sewing thread.
In addition, this line has two kinds of stock thread heating structures hot-blast stretching bellows and electric baking board, depend on the requirements of the different need. Applied to a wide range, this Plastic flat film extrusion machine can be used for the forming of PP, HDPE and LLDPE flat yarn.
Parameters of Plastic Flat Film Extrusion Machine
|Max. extrusion volume(kg/h)||200||280||380||500|
|Ratio of L/D||33:1||33:1||30:1||30:1|
|Revolution of screw(r/min)||20-120||20-120||20-120||20-120|
|Die liP width(mm)||800||1000||1200||1500|
|Flat thread fiber scope(tex)||60-200||60-200||60-200||60-200|
|Dimension of Bobbin(D×L)||136*||176*||208*||256*|
|System installed power(kw)||240||290||320||380|
|System normal operational(kw)||120||150||170||200|
This GY-YLS plastic circle round thread extrusion machine consists of extrusion, stretching and winding unit. This machine is designed and developed on the up-to-dated technology, by HDPE, PP as its raw material.
The circle thread made from the machine is widely used in the area of ropes, cables, fishing nets, construction safety nets, sun shielding nest, artificial hair, mosquito nets, brushes, as well as Protective nets for the Cotton fields.
The feature of this machine is that compacted in its structure, stable in operation, and safe, with different spinnerets as 60, 80, 100, 120, 160, 180, and with the thread ranging form 0.15mm t0 0.35mm. The Capacity of the plastic circle round thread extrusion machine is 15-60kg/h. in addition; ADC motor is used for stretching, so that a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.
The spinnerets are produced by the most advanced way, so that the flatness and uniformity of the thread can Ensured.
Parameters of Plastic Circle Round Thread Extrusion Machine:
|Diameter of screw (mm)||65||90||90|
|Screw ratio( L/D)||28:1||28:1||28:1|
|Rotational speed of screw (r/min)||5-60||5-60||5-60|
|Power of main motor (kw)||7.5||15||22|
|Heating power of main machine (kw)||12||13.5||19|
|Dia.of heating hole (mm)||0.8-1.2||1.2-1.5||1.5-1.8|
|Power of stretching heating (kw)||18||18||18|
|Installing dimensions (m)||12-13||12-13||12-13|
Founded in 1998, we are professional manufactory and supplier of plastic tape drawing machine, and cam type tape winder, woven fabric cutting machine, cement bags making machine, etc. With great quality of plastic tape drawing machine, we established business relationship with customers from countries such as Japan, South Korea, Germany, Egypt, Vietnam, Russia, Britain, and Brazil and so on.